BICS: how the electricity discount will reach your bill Skip to content
Massive equipment in an industrial factory.
Regulation 6 min read

Government tells suppliers how to pass the BICS electricity discount on to manufacturers

C

Charles Osborne

Contributor

The government published its rules for electricity suppliers under the British Industrial Competitiveness Scheme (BICS) on Thursday 19 November 2026. They set out how the scheme’s discount has to reach an eligible manufacturer’s bill, including where the business is already on a fixed-price contract. Applications to the scheme close at 11:59pm on Monday 30 November 2026, and there is no route in after that until the next yearly window. If you manufacture and haven’t applied, apply before then. If you have applied, your electricity contract is the next thing to look at, and that is where we can help.

The facts

  • Who: the Department for Business, Innovation, Science and Trade (BIST), which runs the scheme and decides who is eligible.
  • What: a 54-page guidance document for the electricity suppliers taking part.
  • What BICS does: it exempts eligible manufacturers from the indirect costs of three government schemes that are charged through electricity bills. They are the Renewables Obligation (RO), Feed-in Tariffs (FiT) and the Capacity Market (CM).
  • How much: the government says BICS will cut electricity costs by up to £40 per megawatt hour. On our own maths, that is up to 4p per kilowatt hour.
  • Exemption levels: the guidance works through examples at 50% and at 100%.
  • How long: an exemption is valid for five years, with a yearly declaration and a full review in year two.
  • Review: the scheme itself is due to be reviewed in 2030.

The dates

  • 30 November 2026, 11:59pm: the application window closes.
  • By early 2027: businesses are told whether they are eligible, and suppliers are told which of their customers are.
  • April 2027: the RO and FiT exemptions start.
  • August 2027: the government is “working towards” paying a one-off additional payment.
  • October 2027: the Capacity Market exemption starts.

The guidance says there will be “no mid-year introductions of new businesses onto the scheme”. It also says relief “applies from the certificate’s effective date only” and that “there is no retrospective eligibility”.

What if you’re on a fixed-price contract?

This is the part that matters most to a business that has already signed. The guidance accepts that fixed prices “have already been set and agreed, often years in advance” and already include a set cost for the three levies. It says suppliers “may choose, but are not limited, to”:

  • Reopen the contract and lower the fixed rate to reflect the exemption.
  • Split the three levies out of the fixed price onto a separate pass-through line, charged at nothing or at half. Pass-through means the charge is billed at its actual cost and isn’t fixed.
  • Add a discount line to the bill. The guidance notes that suppliers set their own RO, FiT and CM rates, so each supplier “would need to set their own discount rate, rather than a government-set rate”.

If you don’t agree to a proposed change, or talks aren’t finished in time, the supplier should agree with you how to pass the saving on, “which may include backdating savings to the exemption’s effective date”.

Suppliers are told to “begin these conversations at the earliest opportunity”.

What if you’re about to sign a new contract?

For contracts not yet signed, the guidance says suppliers may ask a prospective customer whether they are eligible, build the expected exemption into their quote, or keep the three levies out of the fixed rate as a pass-through item.

What if you switch supplier?

The exemption follows you. The guidance says the support a business receives “should not be interrupted” when it changes supplier, and that “it is the responsibility of the new supplier” to keep the exemption going. BIST gives every supplier a daily record of the eligible meter points. It lists each one by its MPAN, the unique number for an electricity supply point.

If you switch after applying but before April 2027, the supplier named on your application will be out of date. BIST says it is setting up a process to spot those changes.

The one-off additional payment

Businesses eligible in the scheme’s first year will also get a single payment, funded by the Exchequer, to reflect what they would have saved if BICS had started a year earlier.

  • How it’s worked out: on your estimated electricity use from 1 April 2026 to 31 March 2027, a single discount rate set by government, and your eligible share of use. BIST does the calculation.
  • How it’s paid: as “a one-lump sum payment through a bill credit” from your supplier.
  • When: the department is “working towards payments being made to businesses in August 2027”.

BIST says it will encourage businesses “to ensure that meter readings are up-to-date and accurate”.

How will you know it has been applied?

Suppliers must tell customers clearly that the exemption has been applied and “provide sufficient information to confirm this”. They are “encouraged” to show it as its own line on the bill, but the guidance leaves that “up to individual supplier discretion”. Suppliers are “expected to pass on the full value of BICS exemptions to eligible businesses in a timely manner”.

The questions worth asking

  • Who checks a supplier’s own discount rate? On fixed contracts the supplier sets it, because the supplier set the levy cost inside the price.
  • Will the saving be visible? A separate bill line is encouraged and not required.
  • Who pays for it? The guidance says the cost of the exemptions is “redistributed across the wider electricity system” and offset by other changes and Exchequer funding. Businesses outside the scheme will want to know what that does to their own levy costs. The guidance doesn’t give a figure.
  • Is the last law in place? The rules for the RO and CM exemptions came into force on 6 November. The FiT rules are due on 3 December, “subject to parliamentary approval”.

What does this mean for your business?

  • If you manufacture and haven’t applied, you have until 11:59pm on 30 November. To be eligible a business must be registered at Companies House, be in an eligible sector, make an eligible product and meet a minimum level of electricity use. The government’s eligibility checker and the application are on GOV.UK.
  • If you’ve applied and you’re on a fixed contract, don’t wait for your supplier to choose the method. The guidance leaves the method to the supplier. Send us your contract and we’ll show you what the RO, FiT and CM costs inside it look like, so you know what a fair result is before that conversation.
  • If your contract ends in the scheme’s first year, say you’ve applied when you ask for prices. We’ll put that to suitable suppliers when we compare business electricity prices for you, so the quotes can be judged like for like.
  • Keep your meter readings up to date. The additional payment is worked out from your use up to 31 March 2027.
  • Check the exemption when it arrives. From April 2027 we can go through your bill with you. Our guide to non-commodity costs shows where these three levies sit.

We first covered the scheme in our piece on what the Budget meant for small business energy.

Talk to our energy experts

Applied for BICS, or about to? Book an appointment with our Energy Team, get a quote, or call us on 01273 914000.

Book an appointment

GET IN CONTACT WITH US
Have a question about your energy strategy?

01273 914000

Free tools for your business

Get a Quote

Call Back Request

Book an Appointment

Update Contract End Date

Half Hourly Report Unsubscribe